Search Results (7 total)

The new generation of linac injectors driving free electron lasers in the self-amplified stimulated emission (SASE-FEL) regime requires high brightness electron beams to generate radiation in the wavelength range from UV to x rays. The choice of the injector working point and its matching to the linac structure are the key factors to meet this requirement. An emittance compensation scheme presently applied in several photoinjectors worldwide is known as the “Ferrario” working point. In spite of its great importance there was, so far, no direct measurement of the beam parameters, such as emittance, transverse envelope, and energy spread, in the region downstream the rf gun and the solenoid of a photoinjector to validate the effectiveness of this approach. In order to fully characterize the beam dynamics with this scheme, an innovative beam diagnostic device, the emittance meter, consisting of a movable emittance measurement system, has been designed and built. With the emittance meter, measurements of the main beam parameters in both transverse phase spaces can be performed in a wide range of positions downstream the photoinjector. These measurements help in tuning the injector to optimize the working point and provide an important benchmark for the validation of simulation codes. We report the results of these measurements in the SPARC photoinjector and, in particular, the first experimental evidence of the double minimum in the emittance oscillation, which provides the optimized matching to the SPARC linac.

In this Letter we report the first experimental observation of the double emittance minimum effect in the beam dynamics of high-brightness electron beam generation by photoinjectors; this effect, as predicted by the theory, is crucial in achieving minimum emittance in photoinjectors aiming at producing electron beams for short wavelength single-pass free electron lasers. The experiment described in this Letter was performed at the SPARC photoinjector site, during the first stage of commissioning of the SPARC project. The experiment was made possible by a newly conceived device, called an emittance meter, which allows a detailed and unprecedented study of the emittance compensation process as the beam propagates along the beam pipe.

Third harmonic passive RF cavities have been proposed for installation in both rings of the DAΦNE factory collider to improve the Touschek lifetime and to increase the Landau damping. This paper illustrates the design of the harmonic cavities. The main requirements were to obtain a relatively low R/Q factor and a quality factor Q as high as possible to satisfy beam dynamics requirements and to damp all the higher order mode (HOM) to a harmless level in order to avoid multibunch instabilities. A spherical shape of the cavity central body has been chosen as an optimum compromise between a high Q resonator and a low R/Q factor. HOM suppression has been provided by a ferrite ring damper designed for the superconducting cavities of the high energy ring of the KEK-B factory. The design and electromagnetic properties of the resonant modes have been studied with MAFIA and HFSS codes. Cavities have been made of aluminum and the RF measurements have been performed to characterize them. The measurements are in a good agreement with numerical simulations results, demonstrating a satisfactory HOM damping.

In this paper we study the impact of the rf deflectors beam loading on the transverse beam dynamics of the CTF3 combiner ring. A general expression for the single-passage wake field is obtained. Different approximated formulas are derived applying linearization of the rf deflector dispersion curve either on a limited or an unlimited frequency range. A dedicated tracking code has been written to study the multibunch multiturn effects on the transverse beam dynamics. The numerical simulations reveal that the beam emittance growth due to the wake field in the rf deflectors is a small fraction of the design emittance if the trains are injected perfectly on axis. Nevertheless in case of injection errors the final emittance growth strongly depends on the betatron phase advance between the rf deflectors. If the finite bunch length is included in the tracking code, the scenario for the central part of the bunches does not change. However, for some particular injection errors, the tails of the bunches can increase the total transverse bunch emittances.

A high-harmonic rf system is going to be installed in both rings of the DAΦNE Φ-Factory collider to improve the Touschek lifetime. The main goal of this paper is to study the impact of the 3rd harmonic cavity on beam dynamics making a special emphasis on the dynamics of a bunch train with a gap. The shift of the coherent synchrotron frequencies of the coupled-bunch modes has been estimated. In the following we investigated the effect of magnification of the synchrotron phase spread and beam spectrum variation due to the gap. Besides we simulated the bunch lengthening for different bunches along the unevenly filled train and evaluated the Touschek lifetime enhancement taking into account the obtained bunch distributions. Finally, the “cavity parking” option is discussed. It can be considered as a reliable backup procedure consisting of tuning the cavity away from the 3rd harmonic frequency and in between two revolution harmonics. It allows recovering, approximately, the same operating conditions as were before the harmonic cavity installation.

A longitudinal quadrupole (q-pole) instability was limiting the maximum stable current in the DAΦNE e^- ring at a level of ∼700–800  mA. In order to investigate the phenomenon, the instability threshold has been measured as a function of various machine parameters as radio frequency voltage (V_rf), momentum compaction (α_c), number of bunches, fill pattern, etc. An unexpected interaction with the longitudinal feedback system, built to control the dipole motion, has been found and a proper feedback tuning has allowed increasing the threshold. The maximum stable beam current has now exceeded 1.80 A and it is no longer limited by the quadrupole instability.