Search Results (3 total)

The new generation of linac injectors driving free electron lasers in the self-amplified stimulated emission (SASE-FEL) regime requires high brightness electron beams to generate radiation in the wavelength range from UV to x rays. The choice of the injector working point and its matching to the linac structure are the key factors to meet this requirement. An emittance compensation scheme presently applied in several photoinjectors worldwide is known as the “Ferrario” working point. In spite of its great importance there was, so far, no direct measurement of the beam parameters, such as emittance, transverse envelope, and energy spread, in the region downstream the rf gun and the solenoid of a photoinjector to validate the effectiveness of this approach. In order to fully characterize the beam dynamics with this scheme, an innovative beam diagnostic device, the emittance meter, consisting of a movable emittance measurement system, has been designed and built. With the emittance meter, measurements of the main beam parameters in both transverse phase spaces can be performed in a wide range of positions downstream the photoinjector. These measurements help in tuning the injector to optimize the working point and provide an important benchmark for the validation of simulation codes. We report the results of these measurements in the SPARC photoinjector and, in particular, the first experimental evidence of the double minimum in the emittance oscillation, which provides the optimized matching to the SPARC linac.

In this Letter we report the first experimental observation of the double emittance minimum effect in the beam dynamics of high-brightness electron beam generation by photoinjectors; this effect, as predicted by the theory, is crucial in achieving minimum emittance in photoinjectors aiming at producing electron beams for short wavelength single-pass free electron lasers. The experiment described in this Letter was performed at the SPARC photoinjector site, during the first stage of commissioning of the SPARC project. The experiment was made possible by a newly conceived device, called an emittance meter, which allows a detailed and unprecedented study of the emittance compensation process as the beam propagates along the beam pipe.

Third harmonic passive RF cavities have been proposed for installation in both rings of the DAΦNE factory collider to improve the Touschek lifetime and to increase the Landau damping. This paper illustrates the design of the harmonic cavities. The main requirements were to obtain a relatively low R/Q factor and a quality factor Q as high as possible to satisfy beam dynamics requirements and to damp all the higher order mode (HOM) to a harmless level in order to avoid multibunch instabilities. A spherical shape of the cavity central body has been chosen as an optimum compromise between a high Q resonator and a low R/Q factor. HOM suppression has been provided by a ferrite ring damper designed for the superconducting cavities of the high energy ring of the KEK-B factory. The design and electromagnetic properties of the resonant modes have been studied with MAFIA and HFSS codes. Cavities have been made of aluminum and the RF measurements have been performed to characterize them. The measurements are in a good agreement with numerical simulations results, demonstrating a satisfactory HOM damping.