Search Results (9 total)

Modern colliders bring into collision a large number of bunches to achieve a high luminosity. The long-range beam-beam effects arising from parasitic encounters at such colliders are mitigated by introducing a crossing angle. Under these conditions, crab cavities (CC) can be used to restore effective head-on collisions and thereby to increase the geometric luminosity. Such crab cavities have been proposed for both linear and circular colliders. The crab cavities are rf cavities operated in a transverse dipole mode, which imparts on the beam particles a transverse kick that varies with the longitudinal position along the bunch. The use of crab cavities in the Large Hadron Collider (LHC) may not only raise the luminosity, but it could also complicate the beam dynamics, e.g., crab cavities might not only cancel synchrobetatron resonances excited by the crossing angle but they could also excite new ones, they could reduce the dynamic aperture for off-momentum particles, they could influence the aperture and orbit, also degrade the collimation cleaning efficiency, and so on. In this paper, we explore the principal feasibility of LHC crab cavities from a beam dynamics point of view. The implications of the crab cavities for the LHC optics, analytical and numerical luminosity studies, dynamic aperture, aperture and beta beating, emittance growth, beam-beam tune shift, long-range collisions, and synchrobetatron resonances, crab dispersion, and collimation efficiency will be discussed.

The collimation efficiency for ²⁰⁸Pb⁸²⁺ ion beams in the LHC is predicted to be lower than requirements. Nuclear fragmentation and electromagnetic dissociation in the primary collimators create fragments with a wide range of Z/A ratios, which are not intercepted by the secondary collimators but lost where the dispersion has grown sufficiently large. In this article we present measurements and simulations of loss patterns generated by a prototype LHC collimator in the CERN SPS. Measurements were performed at two different energies and angles of the collimator. We also compare with proton loss maps and find a qualitative difference between ²⁰⁸Pb⁸²⁺ ions and protons, with the maximum loss rate observed at different places in the ring. This behavior was predicted by simulations and provides a valuable benchmark of our understanding of ion beam losses caused by collimation.

The transverse dynamics of a 28.5-GeV electron beam propagating in a 1.4 m long, (0–2)×10¹⁴  cm^-3 plasma are studied experimentally in the underdense or blowout regime. The transverse component of the wake field excited by the short electron bunch focuses the bunch, which experiences multiple betatron oscillations as the plasma density is increased. The spot-size variations are observed using optical transition radiation and Cherenkov radiation. In this regime, the behavior of the spot size as a function of the plasma density is well described by a simple beam-envelope model. Dynamic changes of the beam envelope are observed by time resolving the Cherenkov light.

The successful utilization of an ion channel in a plasma to wiggle a 28.5-GeV electron beam to obtain broadband x-ray radiation is reported. The ion channel is induced by the electron bunch as it propagates through an underdense 1.4-meter-long lithium plasma. The quadratic density dependence of the spontaneously emitted betatron x-ray radiation and the divergence angle of ∼(1–3)×10^-4 radian of the forward-emitted x-rays as a consequence of betatron motion in the ion channel are in good agreement with theory. The absolute photon yield and the peak spectral brightness at 14.2-keV photon energy are estimated.

The concept of using short plasma sections several meters in length to double the energy of a linear collider just before the collision point is proposed and modeled. In this scenario the beams from each side of a linear collider are split into pairs of microbunches with the first driving a plasma wake that accelerates the second. The luminosity of the doubled collider is maintained by employing plasma lenses to reduce the spot size before collision.

In a recent Brief Comment, the results of an experiment to measure the refraction of a particle beam were reported [P. Muggli et al., Nature 411, 43 (2001)]. The refraction takes place at a passive interface between a plasma and a gas. Here the full paper on which that Comment is based is presented. A theoretical model extends the results presented previously [T. Katsouleas et al., Nucl. Instrum. Methods Phys. Res., Sect. A 455, 161 (2000)]. The effective Snell's law is shown to be nonlinear, and the transients at the head of the beam are described. 3D particle-in-cell simulations are performed for parameters corresponding to the experiment. Additionally, the experiment to measure the refraction and internal reflection at the Stanford Linear Accelerator Center is described.

Emissions produced or initiated by a 30-GeV electron beam propagating through a ∼1-m long heat pipe oven containing neutral and partially ionized vapor have been measured near atomic spectral lines in a beam-plasma wakefield experiment. The Cerenkov spatial profile has been studied as a function of oven temperature and pressure, observation wavelength, and ionizing laser intensity and delay. The Cerenkov peak angle is affected by the creation of plasma, and estimates of neutral and plasma density have been extracted. Increases in visible background radiation, consistent with increased plasma recombination emissions due to dissipation of wakefields, were simultaneously measured.

Residual vertical dispersion can be a significant performance limitation for the LEP collider because the associated vertical emittance increase reduces the luminosity of the machine. To make the search for orbits yielding small vertical emittances fast and deterministic, a simultaneous correction of the closed orbit and the residual dispersion was implemented at LEP. The principle of the correction and the resulting performance gains are discussed.